Boiling a 32GHz Brodern radiolink to try to recover some dies 🙈 https://t.co/hCZfBtsVDZ
Receiving the Alphasat 24.9E at 39GHz, very nice signal. Is true tat will be stopped in few months?@esa_es… https://t.co/65C1nPghdV
Working on the fixed 10GHz setup for the new RainScatter season. If you see probability of SCP for JN01 please send… https://t.co/LzUDBxnz4j
First light at 47GHz. Some times the dreams come true! Thanks Jose @ea3hmj and Luis ea5dom for you support and help… https://t.co/Z7mVmJVSzk
Update, 76GHz too!
Great #GHz_bands and #moonbounce meeting. A lot of measures in 47 and 76GHz and the anechoic chamber hes been finis… https://t.co/FZLHjGeGPn
The resistence of the foam loaded with carbon used in the anechoics chambers to dont reflect RF #ghz_bands #RFporn https://t.co/RICniT14Dc
After a lot of hard job my VNA for 47 & 76GHz is finished!
#ghz_bands #hamradio #RFporn https://t.co/ousokLDcrr
How decrease the noise figure very fast??? #hamradio #RFporn https://t.co/wh04ihh73p
Today plumber hat! New waveguides for the 76GHz @Kuhneelectronic transverter #ghz_bands #hamradio https://t.co/PRMIQBc0Ip
New exciting proect! Today, I started to build the anechoic chamber for #ghz_bands #hamradio #hamr #RFporn 🙈 https://t.co/kcMOyGIUdZ
Fire and millimetrics waves, what could go wrong?
#ghz_bands #hamradio #RFporn https://t.co/W4uRAWkRw7
How looks the inside of a V-Band 50/75GHz waveguide isolator?
#GHz_bands #RFporn #hamradio https://t.co/kNDXgCbF76
New rfgen for the VNA, it needs replace the batery and reload the calibration data. The calibration backup was in a… https://t.co/OfH9WuFlU9
Next challenge, moonbounce at 47GHz! 🤪 I will try to use the 32GHz DSN feedhorn. #ghz_bands #hamradio #hamr https://t.co/aKn8jcgWSr
First light of the VNA working at 47GHz! The plot of a @Kuhneelectronic passband filter as DUT. @GHz_bands https://t.co/Cpx85oZlKf
Building a VNA S-Parameter test set for 47 & 76GHz
#GHz_bands #RFporn #hamradio #hamr https://t.co/Ekri5HdavP