Retuning the IF output of the DMC 24GHz downcoverter module

The IF output ot the DMC downconverter is around the 1.5GHz, and need a IF output of 432Mhz. Googling a bit I found the mods of OK1VVM that show hoe modify the module. The mod basically consist in replace two capacitators and remove a resistor as described here.

DMC downconverter before the mod

DMC downconverter before the mod

DMC downconverter before the mod

DMC downconverter before the mod

DMC downconverter after the mod

DMC downconverter after the mod

DMC downconverter after the mod

DMC downconverter after the mod